Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8357599
- Product Categories
- Friendly Links
Information Name: | Explosion-proof solid-state lighting maintenance supplies BFC8183 led lights |
Published: | 2012-02-15 |
Validity: | 30000 |
Specifications: | See details |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | BFC8183 proof solid-state lighting maintenance Overview: For petrochemical plants, offshore oil platforms, workshops and a wide range of flammable and explosive places. A performance: / Explosion-proof the highest level, inflammable and explosive dangerous places in the safe and reliable operation; / High-intensity gas discharge lamp light source, light-efficient, the average life of 10,000 hours or more; / Use crystal glass edges, no glare, can effectively avoid the operation, construction workers have a sense of discomfort and fatigue; / The whole secret of the use of integrated design and the latest surface treatment technology, beautiful appearance, easy installation, rain, water, light shell never corrosion, rust, can be hot and humid and a variety of corrosive and other harsh environments long-term use; / Selection of high-strength aluminum alloy shell with high impact resistance and shock resistance. Two uses: 1, according to the actual job site lighting needs to determine where and how to install lighting, then lighting the distance to the 220V power supply contacts ready corresponding length of three-core cable (such as the use of steel cabling will be three-core cable to the introduction of steel lighting installation at); 2, first remove the screws on the terminal chamber, pull the wiring part of the junction box; from its packaging and remove the seals and fittings (with set screws), in turn set into the cable; then three-core cable at one end were the access box logo "L", "N" and the ground at, with the pressure line card cables pressed and fixed with screws, then tighten the connector, clamping ring, and tighten firmly fixed from the side screws; 3, step 2 will be screwed into the steel components, from the side fitted with locking set screw, and then light the body along the rail into the junction box, and then tighten the screws on the panel; 4, the final three-core cable to the other end connected to 220V power supply according to explosion-proof requirements. 5, replace the lamp, first disconnect the power, then use a hex wrench to remove the set screw on the shell, with a large screwdriver or other tool to loosen the lamp cover six laps, and then slowly by hand carefully remove the lamp cover, spin Under the old bulb replaced with a new bulb. Warning: 1) Do not live to dismantle; 2) Remove the lamp cover, lamp cover and lamp shell out faster when carefully. Three note: 1, the installation and maintenance of lamps, turn off the power, refer to wiring diagram; 2, when used, have some light surface temperature is normal, transparent pieces of center temperature is higher, shall not touch; 3, the company must be used with appliances; 4, replace the lamp, you should use the same type, the power of light bulbs; If you change the type of bulb or power, supporting the ballast should be replaced accordingly. Four technical parameters: Rated voltage: 220VAC 50Hz Housing protection: IP65 Inlet thread: G3 / 4 The introduction of cable: φ8 ~ φ14mm Dimensions: 540 × 364 × 192mm Weight: 11Kg Five quality assurance: This product is in strict accordance with ISO9001: 2000 international quality management system standards for quality control to ensure product quality is higher than the national standard, fully meet the design requirements, the implementation of three-year product warranty, light year warranty from date of purchase 3 years product under normal use is responsible for any failure by the Company free maintenance. |
Admin>>>
You are the 17897 visitor
Copyright © GuangDong ICP No. 10089450, Wuhan Far Di Lighting Engineering Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 17897 visitor
Copyright © GuangDong ICP No. 10089450, Wuhan Far Di Lighting Engineering Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility